5 calculators in this category
- Pallet Pattern Calculator (Cases per Pallet & Cube Utilization)GMA 48 × 40 in pallet footprint; ISO 3676 unit load sizesGive this calculator your case dimensions, your pallet footprint and the maximum height a loaded pallet may reach, and it…
- Freight Density & NMFC Freight Class CalculatorNMFTA National Motor Freight Classification (NMFC), density-based class bandsEnter the outside dimensions and total weight of your shipment and this calculator returns its density in pounds per cubic foot…
- Trucking Cost Per Mile Calculator (Owner-Operator)Fixed plus variable cost model, with deadhead adjusted onto loaded milesThis calculator turns your real monthly costs into a defensible cost per mile and then answers the question that actually…
- Federal Bridge Formula & Axle Weight CalculatorFederal Bridge Formula B, 23 U.S.C. § 127; FHWA Bridge Formula WeightsFederal law limits a truck three ways at once: 20,000 lb on any single axle, 34,000 lb on any tandem, 80,000 lb gross — and, on…
- Forklift Capacity Calculator (Load Center & Attachment Derate)OSHA 29 CFR 1910.178; ANSI/ITSDF B56.1 low lift and high lift trucksA forklift's nameplate capacity is only valid at the load center stamped beside it, almost always 24 inches. Push the load's…
Which one do you need?
- Pallet Pattern Calculator (Cases per Pallet & Cube Utilization)
- Work out cases per layer, layers high and cases per pallet from your case size, pallet footprint and maximum load height, plus cube and weight use.
- Freight Density & NMFC Freight Class Calculator
- Calculate freight density in pounds per cubic foot and get the NMFC density-based freight class for your LTL shipment, with the full class band chart.
- Trucking Cost Per Mile Calculator (Owner-Operator)
- Build your true trucking cost per mile from fixed and variable costs, then solve the loaded rate you must charge to break even and hit a profit target.
- Federal Bridge Formula & Axle Weight Calculator
- Check every axle group on your truck against the FHWA federal bridge formula and the 20,000, 34,000 and 80,000 pound statutory limits, group by group.
- Forklift Capacity Calculator (Load Center & Attachment Derate)
- Derate a forklift's rated capacity for a longer load center or a fitted attachment using a moment balance about the front axle, and check the lift is safe.
Related categories in other subjects
Where this work overlaps other trades and disciplines.