Stairs, Decks, Railings & Fencing Calculators

Code-driven stair geometry, deck framing and material counts, guard and handrail spacing, and fence layout. Heavily used by deck builders, remodelers and inspectors.

6 calculators in this category

Which one do you need?

Stair Rise & Run Calculator
Divide a total rise into equal risers and get exact riser height, tread count, total run and stair angle, checked against IRC and IBC stair limits.
Stair Stringer Layout Calculator
Get cut stringer length, the notch mark for every step, the dropped bottom riser and the throat left in a 2x12 after notching, with the DCA6 5 in check.
Deck Board Calculator
Count deck boards, rows, lineal feet, screws and cost for any deck size from board width, gap and stock length, with a waste allowance for diagonal layouts.
Deck Footing Size & Load Calculator
Size deck footings by tributary area and soil bearing using the AWC DCA 6 method: load per post, required bearing area, footing diameter and concrete volume.
Wheelchair Ramp Slope Calculator (ADA 1:12)
Work out ramp run, landings and slope for any rise using ADA limits: 1:12 maximum slope, 30 in maximum rise per run and 60 in landings, plus decking area.
Fence Picket, Post & Rail Calculator
Count pickets, posts, rails, fasteners and bags of concrete for a wood or vinyl fence from the total run, picket width, gap, post spacing and hole size.

More construction, carpentry & concrete categories